AquaStop

Features: Single-component material, 100% acrylic. It is applied on concrete, cement plaster (mortar), stone base, gypsum boards, and asphalt.
Its elastic waterproofing property allows the sealing of small cracks on concrete surfaces.
Application method: Used for waterproofing structures exposed to positive pressure such as swimming pools, reservoirs, basement walls, floors, bathrooms, closed and open channels, flat roofs, bridges, tunnels, etc.
It is applied to a solid, clean, and dust-free surface. The surface must first be coated with a layer of acrylic emulsion Ultra Prime. After Ultra Prime has dried (4–6 h), the acrylic emulsion is mixed with a mixer (after the first layer, it is recommended to apply fiberglass mesh). This layer must dry (12–14 h) before applying the second layer. Depending on the substrate, a third layer of acrylic emulsion may be applied. Layers must be applied crosswise. The surface must be protected from external atmospheric influences (sun, rain, frost, etc.).
Application is not permitted if the ambient and surface temperatures are below 0°C.

Ultra Prime drying time: 4–6 h.
First layer drying time: 12–14 h.
Layers must be applied crosswise.
Application is not permitted if the ambient and surface temperatures are below 0°C.

Calculate expenses

Add the wall dimensions, and the calculator will calculate your expenses for the given dimensions.

Total area

m²