- According to EN 12004 standards, classifications by intended use are as follows: C1T: adhesive for indoor tiles. C2T: adhesive for indoor and outdoor tiles. C2TES1: universal, flexible adhesive for interior and exterior installation of all types of tiles and resistant to water and heat.
Extra Fix
C2T (White&Gray)
Description and application
- Adhesive based on cement, synthetic resins, and special additives.
- Application is done on a clean and dry substrate. The working surface must be solid, free of dust and other materials that hinder adhesion.
- Preparation: Add approximately 25% clean water (6.5 liters per 25 kg) to the tile adhesive, mixing with a mixer until a homogeneous mass is obtained. The mixed mass is left to rest for about 10 minutes and then mixed again. The mixture can then be applied within 2–3 hours.
- Application is done with a trowel and uniformly with a maximum thickness of 10 mm.
Technical Specifications
Packaging
- Available Weights
- 25kg
Calculate expenses
Add the wall dimensions, and the calculator will calculate your expenses for the given dimensions.
m²